Read the Preston Hollow GoLink map before booking a ride
DART’s zone map can help you check both ends of a neighborhood trip and make a transfer plan.

In this article
The name Preston Hollow is enough to describe a neighborhood to a friend. It is a less precise answer to a transit question. Dallas Area Rapid Transit's on-demand GoLink service uses designated zones, and a trip that starts in the neighborhood still depends on its exact beginning, destination and time. A street close to your stop can be inside the relevant zone while a familiar landmark on the other side of a boundary requires you to plan a connection.
For a first Preston Hollow trip, enter both addresses in DART's planner before deciding whether GoLink will be the whole ride. The zone map gives you a view of the area and possible connections. The result for your actual trip tells you what to investigate, book or combine with another service. This distinction matters especially when you want to be somewhere by a particular time or expect to return from a different entrance.
Start with the addresses the rider will actually use
DART describes GoLink as on-demand, curb-to-curb transportation within designated service areas. The Preston Hollow zone page provides current zone information, hours and links for booking and alerts. Use that page for the transit zone even if a directory or map uses a different outline for the neighborhood. A shaded area on a service map answers a question about transit. Its boundary serves a different purpose from the name someone uses for a neighborhood.
Write down the place where you will start and the address or named destination where you need to arrive. A shopping center can have multiple entrances. A medical building, for example, may have both a street address and a drop-off location the appointment organizer recommends. Ask the destination how it directs people to its entrance. Use the planner or ask a booking agent about the points the service can handle. If two places have similar names, confirm the address displayed in the result before you decide which one is yours.
Look up the return at the same time. A trip home can begin at a different curb, or you might walk with a friend to another business before requesting a ride. Use the address you actually expect to leave from. The return also occurs at a different time and may give you a different set of choices. Knowing where you can request it makes it easier to plan if it will happen after a meal, during a weekend outing or close to the end of the service day.
Read the map for connections as well as coverage
DART's GoLink brochure and zone maps show the Preston Hollow zone in relation to adjoining areas and nearby rail. That wider view is useful when a destination sits across a boundary. Open the linked zone information for the current service details and let the trip planner apply them to your starting point. If the available map and the plan leave you with a question about a particular trip, ask DART about the addresses and time you plan to use.
Royal Lane Station is one place to investigate when a journey combines GoLink and rail. DART identifies it as a Green Line station north of Royal Lane on the east side of Denton Drive and lists GoLink at the station. Use the station page to find its location and available information, and confirm the connection for your trip. The best connection depends on where you begin and where you intend to go past the station.
Imagine you are meeting somebody somewhere reached by rail. The first leg might be a GoLink ride that gets you from the neighborhood to a station. The second leg is the train trip shown to your destination. Find out which boarding point the first part leads to and how much time you need walking to the second part. Compare that route with a fixed-route option if the planner shows one. A ride to a station can look straightforward until you have to locate the train and judge whether you have enough time to board it.
If two parts of the route are described with nearby street names, write the names as the planner displays them. A road, a bus stop and a rail station may use related names without referring to the same boarding point. Look at the street location given on the station's page and the stop shown in the trip. That check is particularly useful if you are giving directions to another traveler who is opening a different map.
Use the booking route that works on the day
DART directs riders to GoPass and its GoLink booking information. It also lists a booking-agent number, 214-515-7272, on the Preston Hollow page. The DART trip planner helps you review possible trips. When using GoPass, look for GoLink in the results for the particular start and destination. Read the proposed trip and check the directions before making a booking. A trip you are looking up for later may also require you to reopen it near departure and review current service information.
If you call rather than using the app, have the addresses available and describe the trip you are trying to make. Give the agent the time you need to arrive if you have a connection or appointment. Ask where you would meet the vehicle, which fare or payment method is available for the proposed trip and how to check a change. For a trip that includes a bus or train, consult DART's fare details for the full plan. The available payment choices can matter when you book through one channel and continue on another service.
When an on-demand booking appears, read the vehicle and trip details supplied by DART. GoLink uses different vehicles and providers, so the identification in your confirmation can be more useful than expecting every ride to look alike.
Keep the information you need where you can reach it after leaving home. That might be the app with a charged phone or a written note with the station name, pickup instructions and the number for a booking agent. If you are traveling as a group, ask what booking and fare details apply to the people traveling with you. One person may be doing the planning while several people need to know where to meet and how the trip will continue.
Work through the pickup and transfer details
Read the pickup instructions while looking at the place you will wait. Suppose you are leaving a building with both a visitor entrance and a large parking area. A driver may approach one side while you are waiting on another. Use the location shared through the booking route rather than assuming that the closest door will be used. If you need to clarify the point, contact DART through the available trip support channel. Ask the venue how to reach the entrance it uses for departures when access changes outside normal hours.
Before a trip that involves walking or changing services, look at the physical route you expect to take. Station information can help you find the location of the rail or bus connection. If you need a particular boarding arrangement or have a mobility or accessibility question, review DART's information and ask about the actual trip. It is more useful to know whether your combination of pickup, station transfer and return is practicable than to rely on a general assumption from a map symbol.
At a station transfer, identify the line and direction as well as the station name. The same platform area can serve people going different ways. Keep the next step visible in the planner and follow current station information when you are there. For a time-sensitive trip, check which later departure or alternate route you would use if the first part takes longer than planned. When you have a deadline, the total trip includes the time to walk, locate the departure and reach the destination from the final stop.
Check the return before leaving the first destination
Open the Preston Hollow zone information and DART alerts shortly before your first ride. Check the scheduled service window for the date and whether the station or a route in your plan has an issue. Save the address from which you expect to request the return. If the location changes during the outing, look up a fresh trip. A pin saved for the outward ride may describe somewhere convenient on arrival without being appropriate for the way home.
If a route involves a meet-up, send the other person a station name or the entrance you are planning to use. If you will split up, confirm each person's route from the new location. Two people who arrived together may need different options later if one continues to another address and the other goes home. The zone map can help you see where the plans diverge. DART's current planner or booking information can then help each person see which choices are available.
After the trip, note the address label or station detail that made the route easier to follow. That is useful the next time a visit begins the same way. Check the current plan again, particularly if the trip runs at a different hour or on another day. For other neighborhood transport and public-space reporting, visit Preston Hollow Today local news.
Sources
- GoPass and its GoLink booking informationdart.org
- Preston Hollow zone pagedart.org
- GoLink brochure and zone mapsdartorgcmsblob.dart.org
- Royal Lane Stationdart.org
- DART trip plannerdart.org