Preparing for Printer Delivery with Cross River Technology

When a new printer delivery is scheduled for a branch, it's essential to have a clear plan for who will receive and set up the equipment, especially if the usual contact is unavailable.

Multifunction printer with a flat scanner panel
Multifunction printer with a flat scanner panel Dinkun Chen · CC BY-SA 4.0 · Resized for display
In this article

A printer can be delivered correctly and still wait several days to become usable. The person who receives it may be able to identify the order and show where the boxes belong, while an authorized technician has to prepare it for the team's work. Decide who owns each part before setting the delivery date. The plan should also tell the branch what to do when the usual building or IT contact cannot be reached.

This guide is sponsored by Cross River Technology, which describes its office relocation IT service. Confirm the scope of a particular order and installation with the vendor, facilities and the authorized IT support team. This guide covers handing over responsibilities and verifying that the office's ordinary work can continue.

Find out what the vendor has agreed to do

Read the order or service confirmation for the delivery date, the model or package being supplied and the activities the vendor says it will carry out. A delivery window may cover bringing boxes to an approved location or include a technician expected to take care of particular installation work. Ask which parts are confirmed and who contacts the office when timing changes. Give the people receiving it an order or reference number they can use through an established channel if the visit needs to be confirmed.

If delivery and setup are two appointments, put the two dates on the plan. The office should understand where the equipment will be held in between and who is responsible for it. Confirm any work required before the technician arrives. An equipment owner can ask the vendor what location and access arrangements will work. Let facilities and authorized staff make decisions under their usual procedures rather than expecting the person accepting a delivery to decide when or how to install it.

Name a receiver and somebody who can cover the handoff

Ask who can actually meet the delivery person during the window. Confirm where they should wait or how the established reception desk will let them know someone has arrived. Provide the authorized receiver with the vendor name, delivery reference, intended location and the names of people to call when something differs from what was expected. They need enough context to identify the order and know which part of the handoff they can handle.

Choose a backup before the usual contact takes time away. Let the backup know which day and time they are covering and confirm that they are authorized for the relevant part of the work. A second person might be able to accept the equipment while a different role has responsibility for any change to the installation. Put the escalation route with the delivery instructions. If a delivery time changes to a point when neither person is available, have the vendor and branch agree what to do before equipment is left at the site.

Connect building access with the intended setup location

Confirm the approved entrance, route inside the branch and place where the equipment will go. Some buildings use a service entrance or require an authorized person to meet a delivery. If staff normally come through the lobby but the printer must arrive another way, tell the receiver where to wait and give the vendor the instructions allowed by the building. Make sure the delivery area and any storage arrangements are suitable before confirming them with the people involved.

Ask facilities and IT to confirm that the approved location supports the work they are expected to arrange. Consider who can verify a site question about the intended placement. A device used by a department may depend on other building or workplace arrangements, even if the room is ready to receive boxes. If the location cannot be used, let the approved owners decide where the equipment should temporarily wait and when setup can resume. Confirm the handoff so the original receiver knows where responsibility next sits.

Verify that IT owns the equipment setup questions

Before treating the installation as ready, identify the IT person or vendor who can review the intended functions and handle the company's procedures for the device. The Federal Trade Commission’s guidance on digital copier data security discusses bringing multifunction equipment into the organization’s security plans and involving the people responsible for IT. A physical delivery and approval to use a networked device are distinct events. Have authorized technical staff make the decisions about configuration, access and data that apply to this printer.

Tell those people which work functions the department actually needs. A branch may need to print internal documents and use an approved method to scan material to a business destination. That information helps staff distinguish priorities. The technical team can assess the options under the organization's rules. Keep account details and any protected business information within the approved process. The staff member using the day-to-day service needs instructions for their role and the right point of contact for help.

Give the branch a planned check of ordinary work

Choose a person familiar with the location's usual tasks and agree what they can test when the authorized team says the setup is ready. A common print job can be checked with an approved test item. If a department has a separate type of work it relies on, confirm whether it needs its own check. Give the person a time and a way to report where the test stopped if something fails. Avoid using live sensitive documents just to establish that equipment is available.

The NIST Cybersecurity Framework guide for small businesses recommends identifying and managing the hardware and services a business relies on. Keep the approved name and location of the new printer in the organization's inventory and in ordinary instructions staff use to find it. Say which capabilities have been confirmed and which remain pending. If the branch has more than one printer, identify which one each instruction refers to so the team can report a problem precisely.

Plan what happens to the older device, if there is one

Find out whether an existing printer is leaving when the new one arrives or remaining available during a transition. Put its pickup or retirement under a separate decision with a named owner. The people who manage supplier agreements and device information should confirm the approved way to handle any retrieval, return or disposal. A branch worker may know which device is still used and be able to tell IT the status. Staff can then follow the sequence the responsible people have agreed.

Leave an approved way for the office to work if the pickup and installation times no longer fit together. The branch may have access to another authorized device while setup is finished. Give workers its location and relevant directions after the department confirms that it can be used. Record any procedure they need to follow for documents. An acceptable interim arrangement should come from the people who maintain the work and equipment, with the planned end clearly communicated.

Close each part with a date and a responsible role

The people meeting the delivery should know which unusual observations to record before sending the vendor away. An order identifier that does not match the expected reference or a visibly damaged package can be referred to the coordinator who owns the order. Follow the organization's instructions on accepting shipments and have the authorized person determine how to handle a discrepancy. Keep any manufacturer's setup questions for the technician. The coordinator can record the facts needed to reach a decision without asking the receptionist to evaluate the device themselves.

Make the installation visit work for the technician as well. Confirm who will admit them and whom they should call when ready to hand the device over. If a contractor needs access to an area that is normally restricted, have the responsible owner confirm the established procedure in advance. Tell the department what will be available while the authorized work is taking place. If a planned test will take more time, confirm where ordinary jobs should be done until the new arrangement is accepted.

After delivery, confirm what was received and where it went. Ask the authorized installation contact which parts of setup have been accepted. Let the people who do the daily work confirm the agreed checks. Put any unresolved part beside a date and role so the person reviewing the record can ask the right question. If employee instructions change, update the versions people will actually find while working. Keep the equipment identification and procedure available to anyone who is authorized to support it.

Give the backup a copy of the latest timing and duties before their next shift. Where a supplier has to return, note which visit is being arranged and who can accept that part of the work. An office can recover from a delivery change more easily when every person knows which piece is their responsibility and how to confirm it has reached the next person.

After the branch starts using the new printer regularly, make sure staff point to the correct equipment when they report an issue. An old device name or out-of-date location on a staff instruction can send a request to the wrong team. Update it through the same channel staff use to look up current procedures.

Confirm whether the vendor or your internal support team owns the first response to a service question. Keep their approved contact method with the equipment details.

Browse more workplace topics in the Preston Hollow Today partner guide collection.

Sources

Share by email